Chapter 5: Management and Diagnostics 23
5
Management and Diagnostics
Please read this chapter if you want to perform modem
management functions, as discussed below, or if you want to run
diagnose a modem problem. If you don’t want to do either of
these things, your modem is probably set up and ready to go. You
may want to read Appendix B, Top and Back Panels, for details
about the modem’s lights and back panel jacks.
Management Buttons
The buttons in the Management group are typically used for
administrative tasks, such as upgrading firmware, changing your
Zoom Configuration Manager password, etc.
The following table lists each button in the Management group
and gives a brief description of the settings you can specify.
Open page from… This button… Opens a page that lets you…
ManagementÆ
Settings
Backup / Update
Restore Default
Save your current configuration settings so
that they may be restored at a later time.
Restore the X3 or X4 settings to the factory
defaults.
Management System Log
By default the System Log is disabled. You
must Enable it and then click View System
Log.
View data generated or acquired by routine
system communication with other devices.
This information does not necessarily
represent unexpected or improper
functioning and is not captured by the
system traps that create alarms. You can
save the system log to a file.
To Next Page
Loading...
