Zoomlion ZCC2600 User Manual

起
重
机
说
明
S
af
et
y
Gu
id
e
li
nes and
Environmental Protection
Maintenance Manual for Crawler Crane
Chapter 2 Safety Guidelines and Environmental
Protection
2.1 Safety guidelines
2.1.1 General
a) Since various dangerous factors exist during maintenance and service of the crane, this
section will talk about the safety guidelines for service technician to maintain and service
crane.
b) These safety guidelines will be involved in the relevant chapter about lubrication and
maintenance and explained in detail if necessary. Read and understand these safety
guidelines before maintenance and service work.
c) The maintenance work must be done by qualified personnel who have received training in
crane technology, especially in electrical and hydraulic systems of crane.
d) No unauthorized personnel are accessible to crane during maintenance and service work.
e) Make sure that the handles, footsteps, the housing parts that can be walked on, platforms
and ladders are free from dust, snow and ice.
f) The service technician must wear tight-fitting protective clothing when servicing the crane,
together with the correct personal protective gear such as safety goggles, breathing mask
for the particular activity.
g) Correctly use auxiliary equipment and set up working platform before performing
high-level operation.
h) The maintenance and service work should be done in time and spare parts should be
changed according to the plan.
i) The customer must use original spare parts which meet technical requirements specified
by manufacturers.
j) Without the permission of our “customer service department”, welding is prohibited.
Unprofessional welding maintenance may cause damage, which is the sole responsibility
of the operator.
k) Do not perform any maintenance work if the service technician is tired, or he has drunk, or
he has taken medicine which may affect the work.
l) Do not reach into moving parts of the crane. The service technician must remove the
ignition start key and hang the “Prohibition” sign on the cab or control device before
operating these parts.
m) Do not touch hot components, hot pipelines, hot liquid and engine body when the engine
just stops. Only when the engine is cooled down for more than one hour, can the relevant
maintenance work be carried out.
n) Cut off the grounding terminal of battery and turn off mast power switch before dismantling
of the battery and welding operation on the crane.
2-1

Zoomlion ZCC2600 Specifications

General

Brand	Zoomlion
Model	ZCC2600
Category	Construction Equipment
Language	English