©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
13
MATERIAL GUIDE
the tube which feeds the material from the spool to the extruder at the proper angle. The
material guide in the Zortrax M200 Plus has to be attached to the extruder and to the
material endstop placed at the back of the printer.
MATERIALS
specially dedicated Zortrax printing materials which maximize the benefits of 3D printing.
These thermoplastic materials are in the form of filaments wound on a spool. Zortrax
offers a wide choice of materials, which are available at: https://zortrax.com/materials/zor-
trax-m-series/. Each material has different properties and can easily be adapted to a wide
range of needs and applications. Moreover, most of the materials can be mechanically or
chemically post-processed.
MODEL LIBRARY
the collection of ready-made models available within Z-SUITE. All models are divided into
categories, for instance art & design, education or robotics. You can find many useful and
attractive models there that have been uploaded by users of Zortrax printers. Moreover,
there is also one category called Zortrax Parts, in which you can find models of parts that are
useful when printing with Zortrax printers, for example extruder top covers.
MOTHERBOARD
the most important part of every Zortrax printer, to which all the necessary components
are connected. It is the main printed circuit board which makes it possible for other parts
of the printer to communicate with each other. The motherboard is placed under the
bottom plate, along with the cooling fan and the power supply unit.
NOZZLE
the final element of the extruder. It is used to direct a flow of material throughout the
entire printing process, allowing to form the desired shape of a model. In addition, the
nozzle is less likely to become dirty thanks to the teflon cover.
PLATFORM
an integral part of the 3D printer, on which the model is created. It consists of two parts:
the heatbed and the perforated plate. Both parts are connected together with the use
of screws and Pogo pins. The heatbed provides proper platform heating, whereas the
To Next Page
Loading...
