©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
16
Z-SUITE
the application created specifically for Zortrax devices. Z-SUITE prepares a model for 3D
printing by generating the file in the .zcodex format. Z-SUITE allows the users to change
and adjust the print settings, such as the size of the model, layer thickness, the type of
infill, or how many support structures will be generated. The last step is to transfer the
file to the printer’s storage over Wi-Fi/Ethernet cable, or by using a USB flash drive.
To Next Page
Loading...
