©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
33
Working options -> Model sorting - this function allows you to organize saved models by
the date and time of saving, or by the file size.
Ignore material endstop - this option allows you to print without having to use the ma-
terial endstop.
In this menu, you can also adjust the Screen brightness.
About printer - this tab contains information which identifies the printer model, its firmwa-
re and hardware version, serial number and total printing time.
PRINT: this tab includes all models saved on the USB flash drive. You can store all of your
files in one or several folders. Here you can also select a model for printing.
Operating Modes of Zortrax M200 Plus
Zortrax M200 Plus indicates its current operating mode with the use of LED backlight.
Every time the printer enters a given mode, the color of LED backlight changes into a
different one.
Red backlight
Red backlight indicates the heating mode, in which the printer is heating up the platform
or the extruder.
White backlight
White backlight indicates all other modes: printing, calibration, and standby.
To Next Page
Loading...
