©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
57
Support
Mechanically removed - printed with the
same material as the model
Extruder
Single (upgraded for more demanding
materials)
Extruder cooling system
Radial fan cooling the extruder block; two
fans cooling the print
Hotend
Redesigned (v3), new geometry of the
nozzle
Platform
Perforated, heated, equipped with Pogo
pins
Material endstop Mechanical
Connectivity Wi-Fi, Ethernet, USB
Operating system Android
Processor Quad Core
Touchscreen 4" IPS 800 x 480
Camera Yes
Available materials
Full offer is available at:
https://zortrax.com/materials/zort
rax-m-series/
External materials Applicable
To Next Page
Loading...
