To Next Page

To Previous Page

ION ITX Series Motherboard

Exit Menu

The exit menu items allow you to load the option or failsafe default values for the BIOS

items, and save or discard your changes to the BIOS items. Press <enter> to display

the sub-menu:

Save Change and Exit

Once you are finished making your selections, choose this option from the Exit menu

to ensure the values you selected are saved to the CMOS RAM. An onboard backup

battery sustains the CMOS RAM so it stays on even when the PC is turned off. When

you select this option, a confirmation window appears .Select OK to save change and

exit.

Discard Changes and Exit

Select this option only if you do not want to save the changes that you made to the

setup program. If you made changes to fields other than system date, system time,

and password, the BIOS asks for a confirmation before exiting.

Discard Changes

This option allows you to discard the selections you made and restore the previously

saved values. After selecting this option, a confirmation appears. Select Ok to discard

any change and load the previously saved values.

Load Optimal Defaults

This option allows you to load the default values for each of the parameters on the

setup menus. When you select this option, a confirmation window appears. Select Ok

to load default values. Select Exit and Save Change or make other changes before

saving the values to the non-volatile RAM.

Load Failsafe Defaults

This option has been set by the manufacturer and represents settings which provide

the minimum requirements for your sys to operate.

Zotac ION ITX series User Manual

Questions and Answers: