Zotac ION ITX series User Manual

52
ION ITX Series Motherboard
6. Press F7 after selecting the target hard disks. A message which says “Clear disk
data?” will appear. If you are sure to clear the data in the selected hard drives,
press Y. (If the hard drives contain previously created RAID array, you need to
press Y to clear the data from the hard drives.)
7. After that, then Array List screen displaying the RAID array you created will appear.
If you want to set the disk array as boot device, use the UP or DOWN ARROW
key to select the array and press B. The Boot section will show Yes.

Zotac ION ITX series Specifications

General

Brand	Zotac
Model	ION ITX series
Category	Motherboard
Language	English