Zotac MAG

Using your ZOTAC MAG
Configuring wireless connection
Follow the instructions below to connect to a wireless network:
Important: For security concerns, Do NOT connect to an
unsecured network, otherwise, the transmitted information
without encryption might be visible to others.
Double-click the crossed wireless network icon 1.
(image) on the notification area.
Select the wireless network you want to connect to 2.
from the list and click Connect.
Note: Enter the network security key if necessary.
After the connection is established, you will see Con-3.
nected.
Configuring wired connection
Using a static IP
Right-click the network icon on 1.
the notification area and select
Open Network Connections.
Right-click Local Area Connec-2.
tion and select Properties.
Highlight Internet protocol 3.
(TCP/IP) and click Properties.
Select Use the following IP 4.
address.
Enter your IP address, subnet 5.
mask and Default gateway.
If needed, enter the preferred 6.
DNS server address.
After entering all of the related 7.
values, click OK to finish the
configuration.
8