Safety information
Your ZOTAC MAG is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important
that you read the following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your •
system.
Do not use this product near water or a heat source such as a radiator.•
Set up the system on a stable surface with the provided stand. Never use the •
system alone without the stand.
Openings on the chassis are for ventilation. Do not block or cover these vents •
Make sure you leave plenty of space around the system for ventilation. Never
insert objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0ºC •
and 35ºC.
If you use an extension cord, make sure that the total ampere rating of the •
devices plugged into the extension cord does not exceed its ampere rating.
Care during use
Use only with power adapter supplied•
Do not walk on the power cord or allow anything to rest on it.•
Do not spill water or any other liquids on the system.•
When the system is turned off, a small amount of electrical current still flows. •
Always unplug all power, modem, and network cables from the power outlets
before cleaning the system.
If you encounter the following technical problems with the product, unplug the •
power cord and contact a qualified service technician or your retailer.
The power cord or plug is damaged.•
Liquid has been spilled into the system.•
The system does not function properly even if you follow the operating •
instructions.
The system was dropped or the cabinet is damaged.•
The system performance changes.•
To Next Page
Loading...
