Zte GRAND X Max 2 - Knowing the Basics of Your Phone; Monitoring Phone Status

38
39
1. Press the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Add network.
4. Enter the network SSID (name). If necessary, enter security or other network
conguration details.
5. Tap SAVE.
Forgetting a Wi-Fi network
You can make your phone forget the details of a Wi-Fi network that
you added—for example, if you don’t want the phone to connect to it
automatically or if it is a network that you no longer use.
1. Press the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap the Wi-Fi network name and then tap FORGET.
Connecting to a WPS network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone
to the access points which supply WPS.
You can use one of the following methods to connect your phone to a
wireless network using WPS.
Method one: WPS button (Recommended)
1. Press the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Advanced > WPS Push Button.
4. Press the WPS button on the wireless router and the access point will
recognize your phone and add it to the network.
Method two: PIN
1. Press the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Advanced > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the access point’s
setup page.
After entering the PIN, your phone automatically nds the access point and
congures the connection.
Note: For detailed information about the WPS feature of the access point,
please refer to its documentation.
Adjusting advanced Wi-Fi settings
1. Press the Home key > > Settings > Wi-Fi.
2. Tap > Advanced to adjust the following settings.
• Network notication: Enable to be notied whenever a public network is
available.
• Scanning always available: Let Google’s location service and other
apps scan for networks, even when Wi-Fi is off.
• Keep Wi-Fi on during sleep: Choose whether or not to keep Wi-Fi on in
Sleep mode.
• Install certicates: Install certicates needed for connecting to certain
Wi-Fi networks.
• Wi-Fi Direct: Use the Wi-Fi Direct feature.
• WPS Push Button: Connect to a WPS network via the push button
method.
• WPS Pin Entry: Connect to a WPS network via the phone PIN method.
CONNECTING TO NETWORKS AND DEVICES
CONNECTING TO NETWORKS AND DEVICES