Zte GRAND X Max 2 - Managing Notifications

40
41
• MAC address: Check the MAC address.
• IP address: Check the phone’s IP address.
Using Wi-Fi Direct
Wi-Fi Direct allows Wi-Fi devices to connect to each other without the need for
wireless access points (hotspots).
Note: Activating this feature will disconnect your current Wi-Fi network
connection.
To connect to another device:
1. Press the Home key > > Settings > Wi-Fi:
2. If Wi-Fi is off, slide the Wi-Fi switch to the On position.
3. Tap > Advanced > Wi-Fi Direct. Your phone will search for other devices
enabled with Wi-Fi Direct connections.
4. Tap a device name under Peer devices to connect with it. The other device
will receive a Wi-Fi Direct connection prompt and need to accept the
request for connection. If prompted, tap CONNECT.
5. Once connected, the device is displayed as “Connected.”
To send data:
1. Open the appropriate application and select the le or item you want
to share.
2. Select the option for sharing via Wi-Fi Direct. The method may vary by
application and data type.
3. Tap a device the phone has connected with or wait for it to search for new
devices and tap one of them.
To receive data:
When an attempt to transfer data via Wi-Fi Direct is received, you can see a
notication in the Status Bar. Open the Notication Panel, tap the notication
and select Accept to start receiving the data.
Received les are stored automatically in a dedicated folder (e.g., WiFiShare).
You can access them with the File Manager app.
Connecting to Bluetooth devices
Bluetooth is a short-range wireless communication technology. Phones or
other devices with Bluetooth capabilities can exchange information wirelessly
within a distance of about 32 feet (10 meters). The Bluetooth devices must be
paired before the communication is performed.
Turning Bluetooth on/off
1. Press the Home key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On or Off position.
When Bluetooth is on, the icon will appear in the Status Bar. Your phone will
be visible to nearby devices while Bluetooth Settings is open.
Changing the device name
1. Press the Home key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On position if Bluetooth is off.
3. Tap > Rename this device.
4. Edit the name and tap RENAME.
Pairing with another Bluetooth device
1. Press the Home key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On position if Bluetooth is off.
CONNECTING TO NETWORKS AND DEVICES
CONNECTING TO NETWORKS AND DEVICES