Zte GRAND X Max 2 - Connecting to Networks and Devices; Connecting to Mobile Networks; Connecting to Wi-Fi

36
37
Connecting to networks and devices
Connecting to mobile networks
Controlling mobile data use
To enable or disable data access:
1. Press the Home key > > Settings > Mobile networks > Mobile Data.
2. Slide the Standard Data switch to enable or disable mobile data use.
To get data services when roaming:
1. Press the Home key > > Settings > Mobile networks > International
Data Roaming.
2. Slide the International Data switch to enable or disable roaming.
Note: Data roaming may incur signicant roaming charges.
Setting access point names
You can use the default Access Point Names (APNs) to connect to the
Internet. To add a new APN, you may need to contact your service provider for
the required information.
1. Press the Home key > > Settings > Mobile networks > Access Point
Names.
2. Tap .
3. Tap each item to enter the required information.
4. Tap > Save.
Note: To set the APN to default settings, tap > Reset to default.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide Internet access
at distances of up to 100 meters, depending on the Wi-Fi router and your
surroundings.
Turning Wi-Fi on and connecting to a Wi-Fi network
1. Press the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position to turn on Wi-Fi.
3. Tap a network name to connect to it.
4. If the network is secured, enter the password and tap CONNECT.
Note: Your phone automatically connects to previously used Wi-Fi networks
when they are in range.
Getting notied of open networks
1. Press the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Advanced.
4. Slide the Network notication switch to the On position.
When Wi-Fi is on, you receive notications in the Status Bar when your phone
detects an open Wi-Fi network. Slide the Network notication switch to the
Off position to turn off notications.
Adding a Wi-Fi network
You can add a Wi-Fi network if the network does not broadcast its name
(SSID) or add a Wi-Fi network when you are out of range.
To connect to a secured network, you rst need to get the security details from
the network’s administrator.
CONNECTING TO NETWORKS AND DEVICES
CONNECTING TO NETWORKS AND DEVICES