Connections Settings 188
2. Tap Wi-Fi.
The Wi-Fi settings menu appears.
3. Tap the Wi-Fi slider to turn Wi-Fi on.
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the slider again.
4. Tap a Wi-Fi network, enter the password, and tap Connect.
Your phone is connected to the selected Wi-Fi network.
The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings let you set up and manage wireless access points.
● Install Certificates for Secured Wi-Fi Networks: From Wi-Fi settings, tap Menu > Advanced >
Install certificates and then select the file to install.
● Use Wi-Fi Direct: From Wi-Fi settings, tap Menu > Advanced > Wi-Fi Direct.
The setting is available when Wi-Fi is turned on.
For more information, see Wi-Fi Direct.
To Next Page
Loading...
