Zte MC7010 - LED Behavior

19
LED Behavior
When setting up the MC7010, the LED will have the following behavior.
Indicator Status Description
POWER
On
Power is on and external power supply is working
normally.
O󰀨 Power is o󰀨.
NETWORK
Red blinking
The device is in error status:
• The device is not registered to the mobile
network.
• There is no nano-SIM card inserted.
• There is no network service available.
Green on
The device is registered or connected to the 5G
network and data is being transferred.
Green blinking
The device is connected or connected to the
3G/4G LTE network and data is being transferred.
LAN
Green on The LAN port is connected.
Green blinking Data is being transferred.
O󰀨 The LAN port is not connected.
SIGNAL
(Three
lights)
On
Three lights show the signal strength. More lights
on means better signals.
O󰀨 There is no signal or no nano-SIM card is inserted.
NOTES:
• All light indicators will be switched o󰀨 automatically after the device operates
normally for about 15 minutes. If indicators need to be solid, you could change
their settings from the conguration web page of the 5G CPE.
• When a problem occurs, indicators will be automatically lighted up again to
help you check the device status. After the problem is resolved, indicators will
be turned o󰀨 immediately.