Zte MC7010 - Accessing the Internet; Confirming Connection Status and Settings

21
Accessing the Internet
After a PC/router is successfully connected to your device, you can access the
Internet in
Automatic
or
Manual
mode. The default mode is
Automatic
.
Mode Operation
Automatic Your device is automatically connected to
the Internet, and you can surf on the Internet
through the router.
Manual 1. Log in to the 5G CPE conguration page.
2. Select network
Settings > Connection
Mode > Manual
, and then click
Apply
.
3. Click to return to the home page, and
click or .
NOTES:
• To change the current connection setting, please disconnect from the Internet
rst.
• To modify the parameters of your device, log in to the 5G CPE conguration
page.
Conrming the Connection Status and
Making More Settings
Conrming the Connection Status
The connection status related information is displayed when you log in to the
conguration home page, and the Status Information below shows the information
about
System information
, LAN details, Cellular connection status, WAN
connection status and advanced status details. You can touch
Detail Information
to get more details. To see details on the connected session, touch
Data Usage
at
the bottom left of the page.
Making More Settings
At the bottom left of the home page, you can send
SMS
, add
Phonebook
and
touch
Advanced Settings
to make more settings of your device.