8
Dual-network Modes
Your device supports the dual-network modes (Automatic Mode and
Hybrid Mode). You can use the nano-SIM card and broadband service
network port (WAN) to access the Internet.
1. Insert the nano-SIM card and connect the broadband service
network port to the LAN port1.
2. Log in to the 5G CPE management web page.
3. Change the operation mode to
Automatic
or
Hybrid Mode
. The
device will be restarted automatically.
f
Automatic:
The wired network is used as the default network.
If the wired network is disconnected, you can use the nano-
SIM card to access the Internet.
f
Hybrid Mode:
You can use two types of networks to access
the Internet at the same time to increase the network speed. If
one is disconnected, the other still works properly.
NOTE:
Please disconnect from the Internet rst and then you can change the
mode.
4. Set the wired network parameters given by your service provider.
5. Use your clients to access the Internet.
To Next Page
Loading...
Need help?
General
