Zte MC888 User Manual

9
Cable Broadband Mode
Your device supports the cable broadband mode and you can use this
service from your service provider to access the Internet.
1. Connect either of the two LAN ports and the broadband service
network port with a network cable.
2. Log in to the 5G CPE management web page.
3. Change the operation mode to
Cable Broadband Mode
.
NOTE:
Please disconnect from the Internet rst and then you can change the
mode.
4. Set the detailed parameters given by your service provider.

Zte MC888 Specifications

General

Category	Network Router
Type	5G CPE
5G NR Sub 6Ghz	Yes
5G NR mmWave	No
4G LTE	Yes
Wi-Fi Standard	Wi-Fi 6
Wi-Fi Bands	2.4 GHz & 5 GHz
Battery	No
SIM Slot	Nano-SIM
Ethernet Ports	1 x WAN/LAN Gigabit Ethernet