Zte MF25 - Basic

20 Confidential and Proprietary Information of ZTE CORPORATION
Select Settings > Wi-Fi Setting > Station List, the wireless network stations are shown in the following
figure:
Basic
Select Settings > Wi-Fi Setting > Basic, the wireless network basic parameters are shown in the
following figure:
• Wi-Fi On/Off: Enable Wi-Fi or not.
• Network Mode: If all of the wireless devices connect with this router in the same transmission mode,
performance will be improved by choosing the appropriate wireless mode.
• Network Name(SSID): Service Set Identifier (SSID). Enter a string less than 32 characters as the name
for your wireless local area network (WLAN).
• Broadcast Network Name(SSID): Disable or Enable (Default) this function. If Enable is selected, the
router broadcasts the SSID, and other devices can detect and connect to it.
• AP Isolation: When Enabled is selected, each of your wireless clients will not be able to communicate
with each other.