Accessing the Internet
Before accessing the Internet, please make sure that the following operations are finished.
• Your device is connected via a network cable or Wi-Fi.
• Your PC is configured.
To access the Internet:
Log in the CPE configuration page.
1. Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page
appears.
2. Input the password and then click Login. The default password is admin.
3. View the current mode on the left top of the CPE configuration page, and then click Change.
4. Select an operation mode which you want to use and then click Apply.
To Next Page
Loading...
