NOTE:
If you change the operation mode, the device will be restarted automatically.
5. Set the detail parameters for the operation mode.
Voice Function
Making a Call
You can make a call through (U)SIM card.
1. Pick up the handset.
2. Key in the telephone number.
3. You can either press the # key on the telephone to send the call, or wait 4～8 seconds for the call to be
connected automatically.
The call will be connected.
NOTE:
If there is no signal indication, the radio signal is unavailable. Change the location of the device and make
sure nothing is blocking it.
Answering a Call
When the phone rings, pick up the handset to answer it. If the telephone has hands-free function you also
can answer the call by pressing the Hands-free button. Press the Hands-free button again to end the call.
WPS Function
Your device supports WPS function. You can use this function to connect the client to your device.
To Next Page
Loading...
