Zte MF283+ - Cable Broadband Connection

11
NOTE:
If you want to change the operation mode, you need to set
the client a xed IP address between 192.168.0.100 and
192.168.0.200, and then log in the 4G CPE page to change
it.
• For Cable Broadband
You need to connect the WAN to the LAN port (LAN1/WAN)
via Ethernet cable and select the WAN Connection Mode.
The other LAN ports (LAN2~LAN4) are used to connect PC
or laptop. There are three WAN Connection Modes: PP-
PoE, Static and DHCP. Please contact with your service
provider to conrm which mode is t for you.
Select Settings > Network Settings to change the WAN
connection mode and set the detail parameters.
u
PPPoE mode
Select PPPoE, input the User Name and Password and
then set the WAN Connection Mode.
NOTE:
Your service provider gives you the User Name and Pass-
word.