Zte MF29A - Page 26

26
The HT physical Mode parameters are shown below:
• Operating Mode: In Mixed Mode, packets are transmitted with a preamble
compatible with the legacy 802.11a/g, the rest of the packet has a new format.
In Green Field, high throughput packets are transmitted without a legacy com-
patible part.
• Channel Bandwidth: Set the HT physical channel bandwidth.
• Guard Interval: Guard interval is to introduce immunity to propagation delays,
echoes and reections, to which digital data is normally very sensitive.
• MCS: The Modulation and Coding Scheme (MCS) is a value that determines
the modulation, coding and number of spatial channels.
• Reverse Direction Grant(RDG): Enable RDG or not.
• Extension Channel: Set extension channel. Extension channel is also able to
send and receive data.
• Aggregation MSDU(A-MSDU):To enable Hyper Throughput TX Aggregate
MAC Service Data Unit, select Enable.
• Auto Block ACK: Select to block ACK (Acknowledge Number) or not during
data transferring. When you enable the WDS function, you should set to enable
Auto block ACK to prevent the other effect during data transferring.
• Decline BA Request: Select to reject peer BA-Request or not.
Click Apply to conrm your conguration.