33
• Comment: Type comment for the lter settings.
NOTE: Filtering rules are matched one by one, if met this provision, it will not con-
tinue to match the rules listed below.
Click Apply to conrm your conguration.
Click Delete Selected to delete the rule which you selected.
Click Reset to clear what you select or input.
To add a new rule:
1. Select Enable in the Basic Settings area.
2. Click Apply.
3. Input the detail information in the Mac/IP/Port Filtering area.
4. Click Apply in the Mac/IP/Port Filtering area.
URL Filtering
You can setup content lter to restrict the improper content access. Select Firewall
> URL Filtering, the URL Filtering is shown in the following gure:
Type URL address, and then click Add to add the URL address into the ltering list.
The new URL ltering item will be shown in the Current Webs URL Filters: eld.