Zte MF65 - Accessing the Internet

11
NOTE:
If the system does not launch installation automatically, you can run
the installation program in path of My Computer > Cellcom.
4. Wait a moment, and then the client will connect to your device
successfully.
Accessing the Internet
After the client connected to your device successfully, you can ac-
cess the Internet in the Automatic or Manual mode. The default
mode is Automatic.
Mode Operations
Automatic
Your device will connect to the Internet automati-
cally, and your clients can surf on the Internet
directly.
Manual
1. Log in the webGUI conguration page.
2. Select Settings > Network Settings > Dial-
up Settings > WAN Connection Mode >
Manual, and then click Apply.
3. Select Home, and then click Connect or
Disconnect.
NOTE:
If you want to modify the detailed parameters of your device, please
log in the webGUI conguration page by visiting http://192.168.0.1
or http://m.home. The default password is admin.