1. View the sticker at the bottom of the battery compartment to get the
default URL to the web page and the password.
2. Launch the Internet browser from a device connected to the MF993C
and enter the URL in the address bar to load the log in page as below.
On computersOn mobile devices
NOTE:
Select PC or Mobile to switch between computer interface and mobile
device interface.
NOTE:
It is recommended that you use Internet Explorer
®
, Firefox
®
, Safari
®
, or
Google™ Chrome™.
3. Enter the password and select Login.
NOTE:
As soon as you sign in to the LTE Hotspot configuration web page, follow
the prompts to change the default password. You can also click Modify
Login Password on the web page (see
Navigating the LTE Hotspot
Configuration Web Pages) to do so.
If the PIN code of your nano-SIM card is enabled, every time the MF993C
restarts you will need to input the code and click Apply on the web page or
OK on the touch screen in order to connect to the Internet.
11
To Next Page
Loading...
