To Next Page

To Previous Page

Managing WPS Settings

Select the SSID and the authentication method for Wi-Fi Protected Setup

(WPS). Click Apply to start the WPS process for the hotspot. See

Using the

Wi-Fi Protected Setup (WPS) for details.

Managing Advanced Wi-Fi Settings

Set the following options for Wi-Fi.

• Network Mode:Select the WLAN protocol. The recommended mode

depends on the Wi-Fi band. When using the 2.4 GHz band, select

802.11 b/g/n. When using the 5 GHz band, select 802.11 a/n/ac.

• Channel Bandwidth:Select a bandwidth option if necessary (not

recommended without prior experience).

• Country/Region Code:Select the country in which your device is

located.

• Frequency (Channel): Select the channel (frequency) for your Wi-Fi

networks. The recommended option is Auto, which will select the

channel with the least potential interference.

Touch Screen Settings

You can manage a few options for the touch screen from the its menus.

From the home screen of the touch screen, touch Settings > Device.

• Language: Set the display language of the touch screen and the LTE

Hotspot configuration web page.

• Screen Brightness: Set the screen brightness level.

• Display timeout: Set the length of inactivity before the screen

automatically turns off. See

Locking/Unlocking the Screen.

• Sleep status display: Turn on or off Sleep status display, which can

Zte MF993C User Manual

Questions and Answers: