Max Wi-Fi devices: Set the max number of devices that can connect
to MF993C via Wi-Fi at the same time. The total max number for 2.4
GHz and 5 GHz clients is 24.
Wi-Fi sleep mode: Set how long Wi-Fi will stay active when no device
is connected.
Managing Basic Wi-Fi Settings
You can configure the basic Wi-Fi settings for the hotspot on the 2.4 GHz
and the 5 GHz bands. Click Apply to save the settings.
• Network Name (SSID): Set the Service Set Identifier (SSID) for the 2.4
GHz bands or the 5 GHz bands.
• Broadcast Network Name (SSID):Only when you check this option can
new Wi-Fi clients find the network.If you want new clients to connect, you
must enter the SSID and password manually.
• Security Mode: Set the security mode for authentication and encryption.
OPEN
Authentication and encryption won’t be performed.
There are risks that private information will be
intercepted or unauthorized individuals will use the
WPA2(AES)-PSK
A more secure version of WPA with implementation
of the 802.11i standard.
Apply both the WPA-PSK and WPA2-PSK schemes.
• Password: Set the Wi-Fi password when the security mode is not
OPEN.
NOTE:
Check the Display Password box to view the password.
• Max Station Number: Set the max number of clients that can connect to
the hotspot wirelessly on this frequency.
22
To Next Page
Loading...
Need help?
General
