55
2. Slide the Wi-Fi switch to the On position.
3. Touch Saved networks.
4. Touch the Wi-Fi network name and then touch FORGET.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points that support WPS.
You can use one of the following methods to connect your phone
to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Swipe up on the home screen and touch Settings > Network
& Internet > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch Wi-Fi preferences > Advanced > WPS Push Button.
4. Press the WPS button on the wireless router and the access
point will recognize your phone and add it to the network.
Method two: PIN
1. Swipe up on the home screen and touch Settings > Network
& Internet > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch Wi-Fi preferences > Advanced > WPS Pin Entry.
To Next Page
Loading...
