EasyManua.ls Logo

Zte Warp - Virtual Private Network (VPN) Settings

Zte Warp
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81
1. Tap Home Key >
> Settings > Wireless & networks > Wi-Fi settings.
2. Tap Menu Key > Advanced and select one of the following settings:
Wi-Fi sleep policy: Specify when to switch from Wi-Fi to mobile data.
MAC address: View your phone’s MAC address, which is a unique identifier assigned to the network
adapter or network interface card by the manufacturer for identification.
IP address: View the IP address information.
Configure the IP settings: Tick the Use static IP box to set IP address, Gateway, Netmask, DNS 1, and
DNS 2.
NOTE: Contact your IP service provider for IP settings and other information.
Virtual Private Network (VPN) Settings
You can set up and manage Virtual Private Networks (VPNs) in this menu.
NOTE: Before you can use a VPN you must establish and configure one.
To add a VPN:
1. Tap Home Key >
> Settings > Wireless & networks > VPN settings.
2. Tap Add VPN.
3. Select a VPN type and do the appropriate configuration settings for this connection type.
4. Tap Menu Key > Save to save the settings.

Table of Contents

Related product manuals