ZTE WP560/960 User Manual
1. Remove the battery cover 2. Install UIM card (pay attention to
UIM card’s cut corner position)
3. Follow the arrow to push the
UIM-card into the card holder
Installing Battery
The FWP is equipped with a rechargeable built-in battery which can supply
power to the FWP when the power adapter is not available. When the power
adapter is supplying power to the FWP, it is also charging the battery.
When you are installing built-in battery, make sure your FWP’s power
switch is in “OFF” state and the external power supply is disconnected.
14
To Next Page
Loading...
