Zte WP560 - Emergency Call

ZTE WP560/960 User Manual
Operation guide
1) Add timed pause during dialing
When you are dialing, Press
<PAUSE> key to input timed pause character “P”
for delay in dialing. One “P” is 3-second delay.
2) If you dial a phone number with extension number, (e.g., the phone number is
123456, the extension number is 12) you input 123456PP12, your phone will
dial 123456 first, then after 6 seconds, it will dial 12. In this way, you can dial
the extension number directly.
7.5 Emergency Call
Function overview
In case of emergencies, only if the FWP can search out the local CDMA
digital network signal, can you dial out the emergency call numbers preset in the
FWP to seek for help.
Operation skill
1） When the Emergency call is over, your FWP will enter the Emergency state, and the
LCD will display:
EmergentCallOnly END to exit
2） You can press <END> key to exit Emergency state
3） During the Emergency state, you can only dial out the emergency call numbers, your
FWP will not respond to any other call numbers.
26