Zte WP560 - Ring Tone; Auto Hyphen

ZTE WP560/960 User Manual
2） Press digital key <3> to select 【Originate Mode】 and enter its submenu,
three options are displayed:
①Sent Press (calls can be dialed out after pressing <RD/CALL>)
②After 3’S（the call will be automatically dialed out 3 seconds after the
number is input.）
③After 6’S（the call will be automatically dialed out 6 seconds after the
number is input.）
3） Select the desired originating mode and return to the upper menu.
8.4.4 Ring Tone
Function overview
15 types of ringings are available for your choice.
Operation guide
1） In idle mode, press Left Soft key and then press digital key <2> to enter
Call Setting.
2） press digital key <4> to enter the interface of Ring Type
3） Scroll to a ringing, and the system will play it.
4） Press the Left Soft key to select the desired ringing and return to the upper
menu.
8.4.5 Auto Hyphen
Function overview
By this function, you can set the input numbers with or without hyphen
according to your own habit.
32