Zte WP560 - Redial; Pause

ZTE WP560/960 User Manual
 When there is an incoming call, press the handfree key;
 Talk time displayed on the LCD;
 Press handfree key again to end the call.
7.3 Redial
Function Overview
This function is for redialing the last called number.
Operation Guide
1) Using handset
 Pick up the handset in idle mode, then a dialing tone is heard;
 Press<RD/CALL> key twice continuously to dial out the last called number;
 Hang up the handset to end the call.
2)
Handfree redial
 Press handfree key in idle mode, the a dialing tone is heard;
 Press <RD/CALL> key twice continuously to dial out the last called number;
 Press handfree key again to end the call.
If you activate Hot Line mode(not activate the call restriction), you can
only dial out the preset hot line calls (excluding emergency calls) by pressing
the
< RD/CALL> key.
7.4 Pause
Function overview
Add timed pause during dialing.
25