ZTE WP560/960 User Manual
4) The line that the scroll bar is on is the alarm time you are editing. You can
press ◄ or ► to move the cursor to the number you want to revise, at this
time the number will flicker, and you can input the desired alarm time by
pressing the number keys.
5) Scroll to the next line by pressing ▼, and then you can press ◄ or ► to select
an alarming method from three options: <Never>, <Once> and <Daily>
6) Press▼ again to scroll to the third line, and then you can press ◄ or ► to
select an alarming bell from nine groups of sound
7) To confirm the setting, press the Left Soft key; to cancel the setting, press the
Right Soft key.
8) When one or more alarms are effectively set, the icon
will appear on the
LCD window when the FWP returns to idle mode.
9) When it comes to the alarming time, there will be time display on the screen
together with the preset ringing. You can press the Right Soft key to exit the
alarm, or the alarm ringing will last 3 minutes before returning to idle mode.
The date and time of the FWP is obtained from the local CDMA digital network.
If the system time cannot be obtained from the network, the preset alarm will become
ineffective.
55
To Next Page
Loading...
