ZTE WP560/960 User Manual
WP560/960 series of CDMA FWP have the following functions：
Voice service
Function Description
Making a call After applying to the local telecom operator for relevant voice
services, you can use the FWP to make local, domestic
long-distance, international and IP calls
Receiving a
call
You can use the FWP to receive incoming calls. If your FWP
supports incoming call display and you have applied to the local
telecom operator for incoming call display service, the incoming
call number will be displayed on the FWP after a ringing
Emergency call Once the FWP can search out the local CDMA digital network,
you can dial out the local emergency call numbers preset in the
FWP to seek for help in case of emergency
Handfree talk
/preset dialing
You can make or receive a call without picking up the handset.
Redial Redial the last outgoing number
Call Delay Insert dial delay during dialing.
Call
forwarding
This function forwards an incoming call to another telephone
you specify no matter the FWP is powered off or not.
Call
waiting
If there is a second incoming call when a call is in progress, you
can choose to receive or reject the second call. If you choose to
receive it, you can switch between the two calls.
Three-way
calling
This function allows three parties to have a talk simultaneously.
You have to apply to the local telecom operator for this service.
Call Restrict You can restrict a user to make or receive calls ( including
domestic and international long-distance calls) via setting
No-interfere Reject the incoming calls from the system side.
Hotline mode Via setting, you can only make preset hotline calls by pressing
<RD/CALL> key.
2
To Next Page
Loading...
Need help?
General
