5. Wait a moment, and then the client will connect to your device successfully.
Accessing the Internet
1. Switch on the device.
2. Connect the client to your device.
3. After the client is connected to your device successfully, you can access the Internet
automatically.
Disconnecting from the Internet
Log in the WebGUI Configuration page, and click the Disconnect button at the Home page.
NOTE:
Powering off the device can also terminate the Internet connection.
WebGUI Configuration
Accessing the Configuration Page
1. Make sure the connection between your device and the client is correct.
2. Launch the Internet browser and enter http://192.168.0.1 or http://mobile.hotspot in the
address bar.
NOTE:
It is recommended that you use IE (7.0 or later), Firefox (15.0 or later), Opera (10.0 or later), Safari (4.0
or later), Google Chrome (10.0 or later).
3.The login page appears as follows. The following figure is only for your reference.
To Next Page
Loading...
