Zte Z289L - Enter Network Password

ZTE Z289L User Manual
12 Confidential and Proprietary Information of ZTE CORPORATION
 Network Name (SSID): Service Set Identifier (SSID). Enter a string less than 32 characters as the name
for your wireless local area network (WLAN).
 Broadcast Network Name (SSID): Disable or Enable (Default) this function. If Enable is selected, the
device broadcasts the SSID, and other devices can search and connect to it. When you select Disable,
other devices cannot search out the SSID. If you want someone to connect, you need to tell them the
SSID, and let them setup manually.
 Security Mode: The security modes are described below:
Mode
Description
OPEN
You can authenticate successfully with a SSID, whether it is valid or empty.
WPA2(AES)-PSK
It is the securer version of WPA with implementation of the 802.11i standard.
WPA-PSK/WPA2-PSK
Apply both the WPA-PSK and WPA2-PSK scheme.
 Pass phrase: Enter the password manually.
 MAX Connections: Choose the maximum number of the stations which connect the AP
simultaneously.
Click Apply to confirm your configuration.
Advanced Settings
Select Settings > Wi-Fi Settings > Advanced Settings, the parameters are shown in the following figure: