EasyManua.ls Logo

Zte ZXA10 S300 - Performance Index of Ethernet Interface

Zte ZXA10 S300
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXA10 S300 (V1.1) Integrated Access Service Dispatching Unit Technical Manual
38 Confidential and Proprietary Information of ZTE CORPORATION
Performance Index of Ethernet
Interface
10Base-TX interface
Table 13 describes the use scope of the 1000Base-SX
interface.
TABLE 13 USE SCOPE OF 1000BASE-SX INTERFACE
Fiber Type
Module Width @ 850 nm (minimum
full load)
(MHzkm)
Minimum Scope
(m)
62.5 μmMMF
160 2 ~ 220
62.5 μmMMF
200 2 ~ 275
50 μmMMF
400 2 ~ 500
50 μmMMF
500 2 ~ 550
Table 14 lists the optical transmitting power of the
1000Base-SX interface.
TABLE 14 TRANSMITTING OPTICAL POWER OF 1000BASE-SX INTERFACE
Item
62.5 μmMMF 50 μmMMF
Unit
Signaling rate (range)
1.25 ± 100 ppm
GBd
Wavelength (λ?, range):
770 ~ 860 nm
Trise/Tfall (maximum, 20% ~
80%, λ ? > 830 nm)
0.26 ns
Trise/Tfall (maximum, 20% ~
80%, λ ? 830 nm)
0.21 ns
RMS spectral width
(maximum)
0.85 nm
Mean optical transmitting
power (maximum)
(Note) dBm
Mean optical transmitting
power (minimum)
-9.5 dBm
Mean optical transmitting
power when the transmitter is
OFF (maximum)
-30 dBm
Extinction ratio (minimum) 9 dB
RIN (maximum) -117 dB/Hz
Coupling power ratio
(CPR)(minimum)
9 < CPR
dB
Note: The maximum transmitting power should be the maximum receiving
power or the danger threshold specified in TEEE803.2, whichever is smaller.

Table of Contents