Zte ZXA10 S300 - External Service Interface of ASC1 Q Board; External GE Optical Interface of ES;ESDGE;ESBGE;PRQ2 G

ZXA10 S300 (V1.1) Integrated Access Service Dispatching Unit Technical Manual
56 Confidential and Proprietary Information of ZTE CORPORATION
External Service Interface of ASC1Q
Board
The ASC1Q board provides one 622 M ATM optical interface. For
details, see
Table 32.
TABLE 32 − EXTERNAL SERVICE INTERFACES PROVIDED BY ASC1Q BOARD
S.N. 1
Signal RX
Line Signal 622 M ATM
Socket core Signal input Pin No. and Signals
Socket shell Ground
Connector LC fiber connector
Configuration At most one pair for each ASC1Q board
Cable 1310 nm single-mode fiber; or multi-mode fiber, if
specially required for
S.N. 2
Signal TX
Line Signal 622 M ATM
Socket core Signal output Pin No. and Signals
Socket shell Ground
Connector LC fiber connector
Configuration At most one pair for each ASC1Q board
Cable 1310 nm single-mode fiber; or multi-mode fiber, if
specially required for
External GE Optical Interface of
ES/ESDGE/ESBGE/PRQ2G
The ES/PRQ2G board provides two GE interfaces, the ESDGE
board provides one GE interface, and the ESBGE board provides
one GE optical interface. For details, see
Table 33.
TABLE 33 − EXTERNAL SERVICE INTERFACE OF THE ZXA10 S300
ES/ESDGE/PRQ2G
S.N. ESDGE/ESBGE
Signal
Line Signal GE