Zte ZXA10 S300 - Output Jitter at the PDH Tributary Interface

ZXA10 S300 (V1.1) Integrated Access Service Dispatching Unit Technical Manual
34 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 9 − G.783 JITTER TRANSFER INPUT AT THE STM-N INTERFACE
STM Level A3
(UI)
A4
(UI)
f2
(kHz)
f3
(kHz)
Reference
STM-1 Optical 1.5 0.15 6.5 65 Table 3/G.825
Figure 1/G.825
STM-1 Electrical
(Note 1)
1.5 0.075 3.3 65 Table 4/G.825
Figure 2/G.825
STM-1 Electrical
(Note 2)
1.5 0.15 6.5 65 Table 4/G.825
Figure 1/G.825
STM-4 1.5 0.15 25 250 Table 5/G.825
Figure 3/G.825
STM-16 1.5 0.15 100 1000 Table 6/G.825
Figure 4/G.825
STM-64 1.5 0.15 400 4000 Table 7/G.825
Figure 5/G.825
Note 1: The value at the 2,048 kbit/s level in the SDH network has been
optimized.
Note 2: The value at the 1,544 kbit/s level in the SDH network has been
optimized.
TABLE 10 − G.783 JITTER TRANSFER TOLERANCE
STM-N level (type)
ƒc (kHz)
P (dB)
STM-1 (A) 0130 0.1
STM-1 (B) 0030 0.1
STM-4 (A) 0500 0.1
STM-4 (B) 0030 0.1
STM-16 (A) 2 000 0.1
STM-16 (B) 0030 0.1
Output Jitter at the PDH Tributary
Interface
Table 11 describes the allowed maximum output jitter index at
the PDH interface.
TABLE 11 − G.823 ALLOWED MAXIMUM OUTPUT JITTER AT THE PDH
INTERFACE
Interface
Test Bandwidth
–3 dB frequencies (Hz)
Peak-to-peak amplitude
(UIpp) (Note 3)
64 kbit/s 20 to 20 k 0.25
(Note 1) 3 k to 20 k 0.05