Confidential and Proprietary Information of ZTE CORPORATION 7
C h a p t e r 2
Product Installation
This chapter shows hardware connections for installing ZXHN H108L,
presents factory default settings, and describes how to configure a
computer for using ZXHN H108L.
Hardware Connections
1. Place the ZXHN H108L router on the plane surface. Minimize
obstacles and the distance between the ZXHN H108L router and
the wireless terminal.
2. ADSL/Ethernet uplink connection
A ZXHN H108L router can access the ISP’s network in ADSL
uplink mode.
ADSL uplink
The user is suggested to adopt the following connection method
for ADSL uplink mode, as shown in Figure 3.
FI GUR E 3 ADSL UPLIN K CO NNE C TIO NS
To Next Page
Loading...
