Chapter 2 - Product Installation
Confidential and Proprietary Information of ZTE CORPORATION 9
Default network name (SSID) for WLAN, wireless encryption mode,
and encryption key are also marked on the label shown on the
cover of the ZXHN H108L router.
Note: If the ZXHN H108L router fails to work due to error
configuration or if the user forgets the login password,
insert a needle into the device’s Reset hole when the device
is running and hold Reset down for more than 10 seconds
to restore the settings to the default ones, then the system
restarts automatically.
Computer Configuration
This section shows how to check computer configuration and
configure TCP/IP for a ZXHN H108L.
Checking Computer Configuration
If the computer uses a proxy server to access the Internet, it is
suggested to disable this proxy service before performing the
configurations. It is recommended to close the VPN software and the
firewalls running on the computer. For example, in Microsoft Internet
Explorer, the user may check the proxy service configuration as
follows:
1. In the browser, select Tools > Internet Options.
2. Click the Connections tab and then click the LAN Settings
button.
3. Uncheck the Use a proxy server for your LAN box if it is
checked.
4. Click the OK button.
Configuring TCP/IP
If the operating system of the computer is one of the following ones:
Windows95, Windows98, WindowsME, Windows2000, and
WindowsXP, there are two ways for configuring the computer (the
first one is recommended). The following instruction uses
To Next Page
Loading...
