Zte ZXHN H108L - Encapsulation

Chapter 4 - Interface Setup
Confidential and Proprietary Information of ZTE CORPORATION 17
 UBR: It is for connections that have variable traffic.
 rtVBR: It is for connections that, while having variable traffic,
require precise timing between traffic source and destination. PCR,
SCR and MBS must all be set for rtVBR.
 nrtVBR: It is for connections that have variable traffic, do not
require precise timing, but still require a set bandwidth availability.
PCR, SCR and MBS must all be set for nrtVBR.
The PVCs Summary button opens a new window that displays the
current PVC settings, as shown in Figure 7.
FI GUR E 7 TH E PVC SUM M AR Y TAB L E
Encapsulation
Four ISP connection modes can be selected according to requirement.
 Dynamic IP Address: Choose this option to obtain an IP address
automatically from the ISP.
 Static IP Address: Choose this option to set static IP information
provided by the ISP.
 PPPoE/PPPoA: Choose this option if the ISP uses PPPoE/PPPoA.
 Bridge Mode: Choose this option if the ISP uses bridge mode.