Zte ZXHN H108L - Dhcp; Table 13 the Descriptions of the DHCP Parameters

Chapter 4 - Interface Setup
Confidential and Proprietary Information of ZTE CORPORATION 25
Parameter
Description
Main IP Address
Enter the ZXHN H108L local IP address. By default, it is
192.168.1.1.
Main IP Subnet
Mask
Enter the ZXHN H108L IP subnet mask. By default, it is
255.255.255.0.
Alias IP Address
Enter the ZXHN H108L Second local IP address. By default ,it is
blank
Alias Main IP
Subnet Mask
Subnet mask of Second local IP address
Dynamic Route
Select the Routing Information Protocol (RIP) to be used from the
dropdown list. And select the direction from the dropdown list
Multicast
Select the multicast protocol to be used from the dropdown list
DHCP
DHCP function can be disabled, enabled or in relay mode. Figure 12
shows the parameters when DHCP is enabled. And Table 13 gives
the parameter descriptions.
TABLE 13 TH E DESC R IP TIO N S O F TH E DHCP P AR AM E TE R S
Parameter
Description
Starting IP
Address
Enter the starting IP address to be used by the DHCP server’s IP
assignment. By default, the starting IP address is 192.168.1.2 and
the ending IP address is 192.168.1.254.
IP Pool Count
Enter the maximum user pool size to be assigned.
Lease Time
Enter the amount of time to lease out a given IP address.
DNS Relay
Select the DNS relay option to be used from the dropdown list. If
the users do not want to use the DNS relay option, set the DNS
relay to “Use User Discovered DNS Server Only” and set both
Primary and Secondary DNS servers to 0.0.0.0.
Primary DNS
Server
Enter the primary DNS server IP address to be used. For user
discovered DNS only.
Secondary DNS
Server
Enter the secondary DNS server IP address to be used. For user
discovered DNS only.