Zte ZXHN H108L - NAT Configuration; Table 18 the Static Route Parameters

Chapter 5 - Advanced Setup
Confidential and Proprietary Information of ZTE CORPORATION 33
TABLE 18 TH E ST AT IC ROUTE PAR AM ETE RS
Parameter
Description
Destination IP
Address
Enter the destination IP address for this routing rule
IP Subnet Mask
Enter the destination IP subnet mask for this routing rule
Gateway IP
address
Enter the gateway IP address for this routing rule or select which
PVC will be affected by this routing rule.
Metric
Enter the metric for this routing rule.
Announced in
RIP
Choose whether this route is included in RIP broadcasts.
NAT Configuration
Network Address Translation (NAT) translates the host IP
address in a packet used within on network to a different IP
address known within another network. The NAT
configuration page is shown in Figure 18.
FI GUR E 18 TH E NAT CONFIG URA TIO N P AG E
Select a virtual circuit (PV0 ~ PV7) and the related NAT status is
displayed.