Zte ZXHN H2640 - Page 106

ZXHN H2640 Maintenance Management Guide(TIM)
7-10
SJ-20200714160642-002 | 2020-07-27(R1.0)
Parameter
Description
 Debug
 Informational
 Notice
 Warning
 Error
 Critical
 Alert
 Emergency
The system stores only the logs of the selected level and above levels.
4. Click Apply button to apply the changes.
Configuring the System Log Management
1. Click System Log Management to the system log management page, see Figure
7-11.
Figure 7-11 System Log Management Page
2. Configure the system log management parameters.
Table 7-5 lists the system log management parameters.
Table 7-5 Parameter Descriptions for the System Log Management
Parameter
Description
Save Log
Click On to enable the system log function.
3. Click Apply button to apply the changes.