Zte ZXHN H298N - Queue Management

ParameterDescription
SourcePortMIN/MAXRange:0–65535
DestinationPortMIN/MAXRange:0–65535
DSCPRange:0–63
SourceIPAddressMIN/MAXSourceIPv4addressrangeofthematcheddataow
DestinationIPAddressMIN/MAXDestinationIPv4addressrangeofthematcheddataow
802.1pRe-markingTomodifythe802.1peldvaluewhenthepacketissent
fromtheWANside.
Ifthedataowthatmatchestheclassicationruleissent
totheCPE,thisparameterdoesnottakeeffect.
Range:0–7
DSCPRe-markingTomodifytheDSCPeldvaluewhenthepacketissent
fromtheWANside.
Ifthedataowthatmatchestheclassicationruleissent
totheCPE,thisparameterdoesnottakeeffect.
Range:0–63
CARIndexTolimittheingressrateforthedataow.
SetthevaluerangeonRuleNumberinCommitted
AccessRate.
QueueIndexToperformthequeueruleprocessingwhenthepacketis
sentfromtheWAN.
Thecontentoftheparameterisdisplayedas“queue
ruleID&devicename&queuepriority”.Forexample,
“Key1&eth0&Prio1”indicatestoprocessthepacketthat
matchtheclassicationruleintherst-priorityqueueon
theeth0device.Ifthispacketisnotsentfromtheeth0
deviceatlast(thismayoccurontheADSLuplink),this
packetisprocessedinthedefaultqueueonthecurrent
device.
3.ClickAdd.
TheQoSclassicationrulesarecongured.
6.8.3QueueManagement
Prerequisite
Beforethisoperation,makesurethatthebasicQoScongurationiscompleteandthequeue
managementisenabled.
103