Zte ZXHN H298N - 4 In6 Tunnel Connection

ParameterDescription
PPPoEpass-throughEnablethePPPoEpass-t;hroughfunction.
Username/PasswordPPPoEusernameandpassword
TheyareprovidedbytheISP.
AuthenticationTypeThetypeincludesAuto,PAP,andCHAP.Bydefault,itisAuto.
ConnectionTriggerTherearethreeconnectiontriggermodes:
�AlwaysOn:Whenthedeviceisstartedorgetsofine,the
systemtriggersPPPoEdialingautomatically.
�OnDemand:ThesystemtriggersPPPoEdialingonde-
mand.
�Manual:ThesystemtriggersPPPoEdialingmanually.
IPversionTheIPversionincludes:
�IPv4
�IPv6
�IPv4/v6
PPPTransTypePPPoE
EnableNATWhenmultiplecomputersinaLANshareoneIPaddress
toaccesstheInternet.NATisusedtotranslatetheprivate
networkaddresstothepublicnetworkaddressoftheWANport.
3.ClickCreate.
4.1.24in6TunnelConnection
Performthisproceduretocongure4in6tunnelconnection.
Steps
1.Choose[Network→WAN→4in6TunnelConnection].
2.SelectCreateTunnelfromtheTunnelNamedrop-downlist,andcongureotherparameters,as
showninFigure21.
34