Zte ZXHN H298N - Committed Access Rate

Table47QueueManagementParameters
ParameterDescription
InterfaceIndicatestheinterfacetowhichthequeuemanagement
functionapplies:WAN,LAN1,LAN2,LAN3,orLAN4.
PriorityIndicatestheprocessingpriorityintherangeof1-4.
Thequeuewiththegreatestpriorityvaluewillbeusedas
thedefaultqueueindevicecongurationqueuerules.
AlgorithmIndicatesthequeuealgorithm,whichisSPbydefault.
WeightWhenDWRRisselectedforAlgorithm,entertheweight
inthetextbox.Algorithmdoesn'tworkuntilthesumof
queues'weightcomesto100%.
3.ClickAdd.
QoSmanagementiscongured.
Postrequisite
YoucanalsomodifyordeletetheQoSrules,aslistedinTable48.
Table48QueueManagementOperations
ButtonDescription
Tomodifytherulesofaqueue
Todeletetherulesofaqueue
6.8.4CommittedAccessRate
Context
ToconguretheQoScommittedaccessrate,performthefollowingsteps:
Steps
1.Choose[Application→QoS→CommittedAccessRate].
2.Conguretheaccessrateparameters,asshowninFigure75.
105